Fiber Compact: everything you need to know

Monday 06 May 2019

Fiber Compactis the brand-new machine for 3D cutting. Its fiber laser source allows treating metals. Therefore, its natural application is within the precision mechanical engineering industry. Linear motors on 5 axes allow rapidly reaching the most difficult corners of the piece to be treated. This way, the part is fixed and cutting accuracy is guaranteed. The machine is controlled by the Alfa Learning device, a control and self-learning software easy to be used. Alfa Learning allows entering data on an 8`-portable tablet.


Strenghts of Fiber Compact

High gantry structure with easy-to-equip working table at 400mm from the floor Completely free from obstacles.

 The machine turns out to be extremely compact with all of its systems and switchboards on.Laser and chiller are on board the machine and this allows very short installation times and little impact in terms of ground layout.

The linear motors ensure extraordinary speed and accuracy. The Bosch absolute linear encoders and the direct drive motors on the rotary axes allow never reaching zero machine and in case of collision with the head they are not to be reset.

New specially designed cabin for easier access.